Copper State Cutlery Knife Show

cskc-knife-show

 

PDF Download

presentation25

Advertisements

Roger Hatt Custom Folder

Canadian Roger Hatt has been making knives since 1994. When you get a Hatt knife, you get a beautiful bang for your buck.

Beautiful Damascus drop point folder with walrus ivory scales.

More information and to purchase the knife here

 

 

 

 

Legends of Knifemaking: Paul Fox

Jesse Paul Fox Jr, known by his middle name Paul, was a long-time member of the Knifemakers’ Guild and owner of Pioneer Woodcarving. As Fox’s friend and fellow maker Tim Britton noted on The Knife Network, “Paul may have been one of the most creative knifemakers of all time. He was perhaps best known for his electric-motor-driven folder and a series of very fancy knives that were a lot like sculpture. He won the W.W. Cronk Award at the Knifemakers’ Guild shows till they asked him to stop entering and let someone else win.

Paul-Fox

Paul Fox 1938 – 2012

According to Britton, Fox had a great sense of humor. “Paul had a Chevy Suburban that he bought at a North Carolina State Surplus auction for $700,” Tim recalled. “It was ugly, yellow and very beat up.  He took it to Hendricks Motors of NASCAR fame and had them put a full race motor in it.  Damned thing would fly and Paul loved nothing better than challenging redneck racers and usually beating them. Guess you have figured out by now, that dude was a character!

“Paul was very much at home with locals—guys from the garage, bread-truck drivers, etc. He was one of a kind, like so many of us in knifemaking. I can still see Paul using the remote control boat to chase geese off his pond!”

– See more at: http://www.blademag.com/featured/knifemaker-paul-fox-dies#sthash.pOlrVOOm.dpuf

 

See his available knives here

Cody Wescott Knives

I’ve added 3 of Cody Wescott knives to the website.

Cody Wescott of Las Cruces, New Mexico sold his first knife in 1982 and is a full time maker at least he was in 1995 according to the 1995 annual edition of Knives, his knives where priced from $80 to some up to $950. back in 1995, he offered engraving and made his own sheaths.

IMG_5078IMG_5082IMG_5144

More information and to purchase these knives can be found here

Claw Push Dagger

Stan McKiernan – River’s Bend Knives

Available for purchase here

Russell Klingbeil Knife

Russell Klingbeil died in January 2004. He was a member of the USMC. An avid surfer and weight lifter. He was an accomplished designer and engineer of fire-sprinkler systems. He was very much into Harley Davidson motorcycles. Remarkably talented at drafting, he was also very good at drawing, often things that would make me laugh and my aunt smack him on the arm. He was an outdoors-man who camped and was an aficionado of the rugged mountain-man lifestyle of yesteryear. He was a black-powder rifleman as well as an accomplished knife-maker.

Here is a Spear Point Boot Knife he made. there were 67 of these made between November 1998 and January 1999. This one is numbered 001.

IMG_5140

His knives are sought after by collectors and rarely come on the market.

More photos and information here.

Randall Made Knives

Randall Made Knives, usually referred to as Randall, is an American custom handcrafted knife manufacturer founded in 1938 by Walter Doane “Bo” Randall, Jr. in the U.S. The factory and showroom is located in Orlando, Florida.
Three Randall Made Knives have been added to the website

Copper State Knife Show

The Copper State Cutlery Association has set the dates for their knife show.

CSCA Knife Show

 

Sonoran Desert Knives will be set up at the show

Mike Tamboli: Master of the Miniatures

For those who aren’t familiar with Arizona custom knifemaker, Mike Tamboli or his knives, then you’ve been missing out on a great resource for collectible miniature knives.

IMG_0451-225x300

Mike, who has been making knives since the early 70’s specializes in making miniature knives. His miniature fantasy knives are sought after by collectors around the world. Over the years he and his knives have been written about in many knife magazines and periodicals.

 

Mike says as much effort goes into making a quality miniature knife as it does a regular sized knife.

But Mike is not just known for his miniatures. He also makes outstanding fixed blades and folders too.

Now’s your chance to pick up and own one of Mike’s miniatures or regular sized folders newly listed at SonoranDesertKnives.com

Legends of Knife Making: Corbet Sigman

Corbet Sigman was born 8 March 1932, in Putnam, W.V. and lived there all his life until passing 5 Aug 2005.

corbet r sigman 7

Corbet was a master of all aspects of making fixed blade knives. A member of the Knife Makers Guild when it was in it’s infancy. When one of his peers had a technical problem or question, it was Corbet to whom they turned. When the Dutchman,. Frans van den Heuvel wanted to learn American cutlery techniques, it was Corbet Sigman he contacted. When American Blade published the book How to Make Knives, 182 pages – step by step process – photo illustrated. They asked the masters of their time, I.E…Bob Loveless, Bill Moran, and many others each to contribute a chapter of the step by step process. Corbet was responsible for the chapter on blade polishing.

He was authentic, genuine, humble and modest. He gave freely his knowledge of knife making to anyone who asked. Those character traits is what made Corbet a gaint amoung his peers with their deepest respect for him.

IMG_5029

http://www.sonorandesertknives.com/corbet-sigman.html